What is Lens Flare?And How To Use It For Creative Photos.

What Is Lens Flare?

If you’re shooting into the light, then you’re going to encounter lens flare. This could be from photographing toward the sun, or even just an artificial light source, such as a flashlight.
Lens flare happens because of the strong light, but its strength is down to your camera lens. The lens elements are made from glass, so when the direct bright-lit hits these elements, they create internal reflections.

Lens hoods are made to eliminate the chance for extra bright light sources from entering your camera lens. When the light enters your digital SLR camera’s sensor, it bounces the light all over the place.
One area that can really help to cut down your lens flares is by using camera lenses with an anti-reflective coating. Editing programs can help to reduce this lens flare effect.

Understanding how types of lens flare happen is key to replicating it for fun and creative uses. You could also add these anamorphic flares into your scenes via Photoshop.
By widening your field of view, you increase the chances of lens flares. Reversely, zoom lenses cut down the possibility. Different lens types treat the sun flares in different ways.
Most of us don’t want lens flare. We actively try to stop it from happening, by either using a lens hood. Or by repositioning ourselves to get the shot.

Shoot Into the Sun

The main points you want to remember is to use spot metering mode on your subject and expose accordingly.
By that, I mean that if you want to prevent your subject from becoming a silhouette, then it’s best to set your camera to manual mode and adjust the exposure yourself.
The sun will produce these lovely flares of light as they pass through your lens. And that’s it. You’ve got some pretty lens flare.

Use a Flash

The photo below actually uses a flash as the light source, in an effort to mimic the lighting that could have been there. As you can see, you still get a very similar effect.
Here, the effect is lessened due to the light not being as strong, and it’s more out of the frame.


You’ll notice that the lens flare takes the shape of your aperture blades. You need to take this into consideration. The better quality (more expensive, usually) your lens is, the smoother the flare is going to be.

If you open your aperture all the way up, then the flare is going to be smooth and circular. This is because there are no blades blocking the light.


When you shoot directly into the light source, your camera will have a tough time trying to find the right point of focus. To counteract this, there are three things you can do:

Firstly, you can use your focal lock to lock your focus on your subject with the sun blocked. Then recompose slightly and take the photo with the focus in the right place.
Secondly, you can use a narrow aperture. When you have lots of light at your disposal, you can stop down to a narrow aperture, and this will give you a deeper depth of field.
Thirdly, you can use manual focus and take all the control back yourself. This will work, but it’s not exactly the first choice.

Angle the Light

If you want the light to produce an artistic flare, then it needs to be coming across your photo. Good lens flare depends on the angle of the light, which correlates with the time of day.

Shoot in the evening with your lens flare coming from the side of your frame, perhaps using the rule of thirds.

Read Previous

Hawaii Photography A Travel Photographer’s Guide to Locations and Tips.

Read Next

Which of the Cyclades Islands in Greece should you visit

Leave a Reply

Your email address will not be published.